Welcome to Sanjin Elevator Parts Website!

Focus on the development and production of elevator parts for 18 years

Shaanxi Sanjin Elevator Fittings Co.,Ltd.

SIGMA elevator door controller BG202-XM-II

Model:BG202-XM-II

Brand:SIGMA

MOQ:1 pcs

Warranty Time:1 year

Certificates:ISO9001

SIGMA elevator door controller BG202-XM-II
BG202 series elevator door drives are high performance control drives used for elevator door.
1.The drive can be adapted to BST PMSM
2.Protection class IP20 Door drive protection class is IP20, even reach IP21...

Contact Us
SIGMA elevator door controller BG202-XM-II


 

Product Introduction


1.Use beyond the rated voltage values If the input supply voltage is not within permitted voltage range as manual required, it is likely to cause drive damage. Therefore, use the pressure regulating device to process the input power.
2.Derating use At area where the altitude is over 1000 meters, the thin air causes deterioration of drive cooling, please use it by derating.


Product Technical specifications

 
 
Project Sub-project Description
Input Power Rated voltage Single-phase AC 180V —AC264V
Rated frequency 50 Hz,±5%,60Hz±5%
Motor Motor type BST PMSM:
Rated Power: 47W Rated voltage: 125V
Rated current: 0.42A Rated torque: 2.3Nm
IP protection: IP44
Signal input Open door
signal input
1.Optocoupler isolated inputs;
2.Through the jumper settings, external power supply can be used; External power supply: Common Positive or Common Negative is optional. Rated load DC24V (50mA max), no more than 50mA Internal power supply: common emitter and common±10% collector are optional mode.
3.Signal priority from high to low as:
I.Nudging signal
II.open door signal
III.close door signal
IV.Reserved
Close door
signal input
Nudging signal
input
Reserved input
Signal output Open limit
signal output
1. Contact max. Capacity: AC250V/2A, DC30V/1A;
inductive load require derating.
Close limit signal output 2.Open limit signal and Close limit signal use a common terminal(normal open and normal close are optional);
3.Normal Open or Normal Close are optional for Obstruction signal
Obstruction signal output
SGS signal output
Encoder
interface
Encoder type ABZ encoder
Debugger Panel(Standard) Status monitor and parameter revision
Status LED MODE Four LEDs lying in the debugger panel show the drive status. MODE: When the light is on, it shows that the motor is running.
When the light is off, it shows that the motor is not at work. OPEN: When the light is on, it shows that the motor is running in opening direction.
CLOSE: When the light is on, it shows that the motor is running in closing direction.
FAULT: When the light is twinkling, it means Fault happens
OPEN
CLOSE
FAULT
Communication RS485 Reserved
Operating mode I0 mode, Panel mode, demo mode
Fault reset some automatically reset, some can't reset until power off
self-study Motor self-study, door width self-study
fault Over-voltage protection, under-voltage protection, over temperature protection, overload protection, over-torque error, self-learning fault, lack of phase protection, EEPROM read and write error alarm, ADC detection error, ADC offset error, belt slip error , encoder fault alarm, communication error alarm, temperature sensor failure, the DC bus voltage detection errors, SPM module fault, obstruction fault, open door fault, close door fault, overspeed protection.
 


Product  Display Function

 

The panel has several display interfaces including software version , status function code, status parameter, password login, system function code, system parameter, revision, real-time warning of sudden fault.


Product  Maintenance

 

Lots of factors such as ambient temperature, humidity, acid/alkali substances, dust, and vibration, internal component aging and wearing may raise the chance of the occurrence of potential faults. Therefore, it is quite necessary to conduct monthly checking and periodical maintenance to the drive that are operated or stored. User shall operate drive according to user manual, maintain drive at regular intervals (12 months as general), ensure reliable running of drive. Maintenance includes:

  • Check if terminal wiring has been loosened
  • clean dust inside drive at regular intervals


What We Do


1.the largest elevator parts company integrating warehousing with marketing.
2.Leading supplier and expoter in elevator parts industry.
3.We have various brands elevator parts,such as Kone,Otis,LG Sigma,Toshiba,Thyssen and so on .
4.With the excellent after-saled service and warranty.

 

Buyer Guarantee


--- Your supplier has 18 years focus on elevator and escalator parts manufacturer and trading,and the preferred source for elevator parts to help mechanics and elevator service contractors repair and maintain elevators the world over.
--- Professional technical engineers,offer elevator technical solution&after-sale service.
--- One-stop shops for all lift&escalator parts and service.
--- More than 30,000 types product in stock, That means you can make one call to SANJIN and very likely get every item you need!
--- Repair & modification to old elevator.
--- Free of charge to change if occurs unman-made broken within 12 months.


Notice


1. Shaanxi Sanjin Elevator can supply original elevator and escalator parts from famous brand like Otis, Kone, Mitsubishi, Hyundai , Thyssen, Hitachi, Toshiba, Fujitech, LG Sigma, Bluelight, CANNY, SANYO, BLT Brilliant, Monarch, STEP, etc.
2. Becuase there are various models and specifications for different spare parts, some products' description may not be very accurate, the information is for reference only.
3.Since different product have different specifications, like size, weight, model etc., therefore they may need details like part number or photos to confirm. Please leave us message if have any needs:
Whatsapp:   008615389448152
Email:       sanjin.elevatorparts@westdt.com
4. Presently, the SANJIN`s product line includes over 30,000 parts, with new PC boards, peripherals and subsystems rapidly swelling the company's inventory.Since the website cannot show them all, if cannot find needed product in website, please contact with our colleagues.
5.We carry high quality KONE Elevator OEM Parts and replacement parts, as well as commercial replacement parts for a wide range of other manufacturers.
6.We are directing you to the SANJIN website to ensure that your questions are answered - and your parts orders are processed - in the most timely and efficient manner possible.

 

At SANJIN Elevator Products Company, we are committed to providing our customers with the highest quality elevator and escalator OEM/replacement parts in a timely, most professional manner. We`ve built our business around the basic premise of helping our customers meet their requirements by offering exceptional customer service, competitive prices and quality OEM (original equipment manufacturer) Parts.



Looking for ideal elevator door controller Manufacturer & Supplier ? We have a wide selection at great prices to help you get creative. All the elevator door controller are quality guaranteed. We are China Origin Factory of elevator door controller. If you have any question, please feel free to contact us.